How to change timing belt kit and water pump on AUDI A4 (B7) [TUTORIAL AUTODOC]
HTML-код
- Опубликовано: 9 июл 2024
- How to change timing belt kit and water pump on AUDI A4 3 (8EC) 2.0 Saloon 2004-2008 [TUTORIAL AUTODOC]
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
All video and pdf tutorials on AUDI A4 B7 parts changement: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/au...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AUTODOC App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Timing belt kit: www.autodoc.co.uk/car-parts/t...
Timing belt kit for AUDI A4 B7: www.autodoc.co.uk/car-parts/t...
Water pump: www.autodoc.co.uk/car-parts/w...
Water pump for AUDI A4 B7: www.autodoc.co.uk/car-parts/w...
Water pump + timing belt kit: www.autodoc.co.uk/car-parts/w...
Water pump + timing belt kit for AUDI A4 B7: www.autodoc.co.uk/car-parts/w...
LIQUI MOLY Fast Cleaner: www.autodoc.co.uk/liqui-moly/...
REINZ Sealing Substance: www.autodoc.co.uk/reinz/98254...
LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts changement ➜ ruclips.net/user/AutodocUk?s...
00:00 - AUDI A4 (B7) - timing belt kit and water pump: step-by-step replacement tutorial
03:31 - Remove the headlight.
13:37 - Turn the crankshaft gear.
18:39 - Install the new timing belt according to the factory marks.
25:57 - Screw in the fasteners of the hydraulic power steering hoses.
31:38 - Install the headlamp.
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► AUDI car repair tutorial - • AUDI car repair tutori...
► AUDI A4 (B7) car repair tutorial - • AUDI A4 (B7) car repai...
► How to change front springs on AUDI A4 (B7) - • How to change front sp...
► How to change rear shock absorber on AUDI A4 (B7) - • How to change rear sho...
Mobile shop: m.autodoc.co.uk
📢 AUTODOC on social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
RUclips: / autodocuk
Instagram: / autodoc_autoparts
TikTok: / autodoc.eu
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2020 AUTODOC GmbH All rights reserved Авто/Мото
Did you turn on notifications? We'd really appreciate it!
German engineers: our cars are very serviceable! all you have to do to replace a belt is take apart 50% of the entire vehicle. it's quite simple. 5 minutes to replace the belt and 5 hours to get to that belt.
Are there not tools to do this job without taking the front off 🤔
@@jonlister1981 No, this is the "correct" way to do it. It is possible to do it without taking off the front, but it is not recommended.
@@cristiandemirel1918 but the other way it takes only 20 minutes not 3 hours 🤷♂️ and works well
@@jonlister1981 it is possible to do without taking the front off?
There is the Audi service position which doesn't require the complete removal of the front end... In this video they don't demonstrate the "easy" way. Anyway all repair shops in Europe will replace the belt+ water pump without even putting the front end into the "service position" or dismantle the front end as demonstrated they can do the replacement even with limited access. Lastly the replacement isn't difficult its just timing consuming for the average Joe plus u need to have some experience with the timing marks on this engines so instead of paying 100euros for some shop to replace it u can spend 6-8 hours to do it urself....
We need many audi a4 b7 videos like this ty.no talking just pure work and instructions beautiful !!
Thank you for your comment.
More videos for AUDI A4 (B7) in this playlist:
ruclips.net/p/PLWep5LzT0sxnQUEr-pkS1h9xhOJaP5gZ4
AUTODOC
Fantastic video Thanks We really appreciate it! This is the best video on Audi
Awesome video! Just start back working on my B7 ready to put her back on the road!
I have learnt a lot about my recently purchased Audi from watching your videos, Thank you. To make your videos better you could give the car parts a clean so they looks more presentable. Also some more information on the lock-tite and silicone sealant used.
this is the best video on Audi 2.0 qattro. All the clowns complaining about removing front end, the crank pulley bolts are known to strip, removing the front end is worth it
Top bravos 👏👍🏼
CONGRATULATIONS!
so gorgeous~~ thank you.
very benefit channel, I want learning about opel corsa c/2005 periodic maintenance
Brilliant video! Followed it as I done the job and it was a breeze to do….. thanks
Thank you for sharing your opinion with us.
well done, really benefited
Thank you for the feedback!
We are glad you liked our video.
Stay tuned.
Best regards, Autodoc.
Superb chanel ❤️
Good, good 👍👍👍👍👍👍👍
have an issue with the tension the bolt spins and doesn't come off, would you know what else i could do thanks
Love this ! Just wish you you would name each part as you take it off! Love you vids
Thank you for your valuable recommendation, we will definitely take it into account when shooting new videos and further replacements of these parts.
AUTODOC
Subscribbed. I just bought an a4 cabrio. Think i might need all these videos.
Thank you for your feedback!
We make our videos based on recommendations we get from people who need them. We hope our tutorials were useful for you.
Please stay tuned with us for more interesting news.
Best regards,
Autodoc team!
Thank you for your feedback!
We make our videos based on recommendations we get from people who need them. We hope our tutorials were useful to you.
Please stay tuned with us for more interesting news.
Best regards, Autodoc team!
Hi, first of all, I watch your videos from Turkey and I really like the useful information you provide. I am also an A4 B7 Avant 2.0 TFSi Quattro user and there is something I'm curious about.Isn't there any spindle in the middle of the triple circle behind the tire hood at scene 35:54'' When I saw the same gap in my own vehicle, I thought there must be a part missing here. Thanks in advance for your help and support!
Great informative video as all ways.....could I have a link to the sealer you used on the water pump please. 😊👍👍👍👍
Dear Customer.
Thank you for your request!
Here is the sealant we used for the bolts:
www.autodoc.co.uk/liqui-moly/9660891
Best Regards,
Autodoc team
please make a timing belt change for an A6 c5. I am having trouble removing the radiator.
Hello, at the time of 4:15 you removed a sensor in front of Aircon radiator, what is the name of that sensor please ? . my car is 2006 A4 B7 8EC but has some different parts !!! - thanks
Can you show how to change brakes on a renault Kangooo maxi that would be a big help to me thank you from🏴👍
Thank you for the feedback!
You can have a look at all tutorials regarding the replacemenys in the Renault Kangoo here: ruclips.net/p/PLWep5LzT0sxllCXnnv07nWxWX-F_XyPS9
Stay tuned and follow our latest updates.
Best regards, Autodoc.
Grate works... Good explain... I am kindly asking to you reduce/remoe background sound from vedio ... Thanks you very much
Thank you for sharing your opinion with us.
Seen it done with front end leaning forward but i was using drill bits for pins and a breaker bar clamps to the bottom end and chasy. With a tipline to guide so i took mine apart like this took ages but it runs and drives so i can not complain 😂
Thank you for alignment of factory marks.
Also who takes timing belt off with out rotating to factory marks
We are sure that your comment will be useful for many of our viewers.
@@autodocuk I doubt it. It just amazes me you would remove a timing belt at anypoint on an engine without finding the factory marks. What even worse is this is a VVT engine meaning at some points of rotation you may not have rotational slop on one of the cams. AMAZING what you did here.
that's why i sold my audi very complicated to work on
do you know a modern german car that is easy to work on?
How many marks are they and how many times you turn the mark
Did you put the crow bar on there 14:12 to hold it from moving
Absolutely correct.
Thanks for the helpful video. I noticed when I took my upper cover off my timing belt the alignment was off by a tooth and a half from the arrow mark. The mark is on the left side of the tooth and the arrow mark is on the right side of tooth in between the teeth. Crank shaft marks aligned. The car was running fine at 95,000 miles in this position. (original belt) So with new belt I placed my alignment marks so the arrow mark was centered on the tooth with the mark. (in between the tooth mark and original position). Manually rotated belt to check for interference. All good. put car back together. Ran for about 40 miles no issues then car started missing. P0300 error. Changed coils and plugs. Ran good for 5 minutes then P0302 error. I think my timing is off. Should I align to designated marks or original timing position. Thanks
What’d you end up doing, when I tighten the tensioner it moves the cam from mark about half a tooth
May be a little late but make sure your first piston is TDC
How different is the 6cyl 3.2L version from this?
Cars with different engines differ with the number of rollers, their location, belt length, and the appearance of the water pump. Also, the engine can be with a timing chain drive, and not a belt drive.
AUTODOC
When I start to tension the belt with the tensioner, it moves the cam off by about half tooth… I moved crank past mark to compensate but then it doesn’t move when I tighten the belt, what is happening 😭
did you sort it mate?
@@TheSpikegreenwood I just went with the half tooth off, car runs fine. I hand cranked couple times and it was smooth didn’t feel like rods were making contact. I also checked TDC on piston 1 with a long screwdriver it was good. Damn, I was so nervous starting the car up the first time hah
@@brozyes yea I bet, scary shit. Did you block it off with the crowbar before undoing everything?
On my car the crank timing mark and the cam timing mark are slightly off it causes the engine to misfire. How do I adjust it?
It is difficult to say something without proper diagnostics, we recommend contacting the service. Car operation until the moment of elimination of this problem is not recommended.
We wish you a Merry Christmas and a Happy New Year.
AUTODOC
Hello Autodoc, Which brand is the belt kit you have used?
Belt from the manufacturer GATES.
Can i have video change waterpump for golf gti mk5 2.0?
We recommend that you contact our technical support and provide the VIN code for the selection of a water pump.
AUTODOC
At the time 23:27 it shows that the tree M8 bolts should be be tightened to torque 54 Nm, is it really correct value? My original M8 bolts starts to snap off before 54 Nm. I replaced the bolts to same quality 8.8 and tightend those to 25 Nm. Comments about that?
Yes, you are right the correct torque is 23 Nm, it will be useful for us. Thank you for your consideration.
@@autodocuk okay, thank you for the correct value. Your instructions is the best I have seen, I am very grateful to be able taking part of your content ❤️
Is the 1.9 tdi the same as this?
In general, the replacement will be the same, the only thing that may differ slightly is the design features of your car.
You can find more detailed information in the technical documentation for your car repair.
AUTODOC
Some amount of work to just change a belt
❤🎉😅
When I tighten the tensioner, it Throws the cam off it’s Mark… what do I do, it’s off by half a tooth
Unfortunately, according to the description, it is difficult to advise anything, we recommend contacting the service.
AUTODOC
The bumper fits very badly ... The gaps are too big.
this is way too hard to reach to the water pump compare to all the japanese car.
wow for changing water pump, too much disassembly. that's why i prefer japon car. easy fix.....
Thank you for sharing your opinion with us.
German engineering...great video though
Thank you for sharing your opinion with us.
Nice vid but why take the whole front end off? Just move the front clip (lock carrier) to Audi service position 1+ (also called Audi service position 2).
Unneeded:
-Headlight removal
-Intercooler ducts removal
-Power steering cooler removal
-Ambient temp sensor removal
-Trans cooler lines separated
-Coolant lines disconnected?
-AC lines? What? Why?
I'm tired just watching this.
Just slide/pivot the lock carrier forward and rest it on the front snub motor doughnut. The cables and hoses are long enough and made to do this. Provides more than enough room to service the TB and water pump. Geez.
All the best, Hayabusafalcon.
This video contains only tips and tricks that may be useful when repairing a car or replacing parts. All routine replacements and values are found directly in the technical documentation for your car or use the help of a car maintenance service.
AUTODOC
Way too many unnecessary steps just to get it into service mode position. No need to remove headlights or the whole front end.
Our videos are for guidance only.
All routine replacements and values can be found directly in the technical documentation for your car or use the help of the auto maintenance service.
You prolly damaged tht water pumps O-Ring too. SAD
Very complicated to do such a regular maintenance work .thanks Auto Doc and Shame on YOU AUDI
Thank you for your feedback!
We are glad that you like our work. Keep for updates.
AUTODOC.
1:45 Copper grease on the hubs will make the alloy wheels corrode more quickly, where they touch the copper grease... Autodoc obviously do not understand chemistry... copper grease should NOT BE USED between 2 different metals....
Thank you for sharing your experience.
For us and our viewers this will be very useful information, but if copper grease is not used between two different metals, how can you explain the application of copper grease to the threads of the sparks that are screwed into the head?
@@autodocuk Copper grease SHOULD NOT be used on the threads of spark plugs.
Moral of the story: never buy an Audi
Tell that to 90% of the Eastern Europeans.
To replace the belt and pump, you need to disassemble the floor of the car ... Audi engineers, what are you smoking there?
Yes, may be in Tesla is easier
Probably they did it so they could film it. I'm pretty sure they know what they doing otherwise
you just have to unscrew the radiator and put it into "Audi service position" you have like 20cm room to work
@@arbremagique6253 its hard to see timing on crank pulley and gear. if you cannt see crank gear timing correctly, you are fuQed
Turn that annoying music off!
you did sooooooo much unnecessary work.